What reloading presses are compatible with the Redding 75226 Body Die in Australia?

The Redding 75226 features an industry-standard 7/8"-14 thread interface, making it fully compatible with all standard single-stage and progressive reloading presses commonly used in Australia, such as the Redding T-7, RCBS Rock Chucker, and Hornady models.

Does this body die resize the case neck or deprime my .257 Weatherby Magnum brass?

No, the Redding 75226 is specifically designed as a body die only. It contains no internal decapping assembly or neck expander button, meaning it resizes the case body and bumps the shoulder without altering your pre-worked neck dimensions.

Which shellholder is recommended for use with the Redding 75226 Body Die?

Redding recommends using a standard #6 shellholder (such as the Redding Part #11006) or a Competition Shellholder #6 (Part #11606) with this .257 Weatherby Magnum die, which are sold separately.

When should I choose this body die over a traditional full-length sizing die?

You should use this body die in conjunction with a separate neck-sizing die or neck bushing (such as the Redding 0.291 Inch neck sizing bushing) when your fire-formed brass begins to create chambering resistance, allowing you to bump the shoulder and resize the body without disturbing precise neck tension.

Does the Redding 75226 Body Die require any special maintenance or electrical compliance for Australian use?

Being an entirely manual, non-powered steel reloading tool, electrical compliance regulations such as 240V or SAA/RCM certifications do not apply. Maintenance simply involves keeping the heat-treated alloy steel clean and applying appropriate case lubrication to the exterior of the brass before each resizing stroke.

257 Weatherby Die - Redding 75226

The Redding 75226 Body Die is a dedicated handloading tool engineered specifically to full-length resize the case body and bump the shoulder back to SAAMI specifications on fire-formed .257 Weatherby Magnum brass. Machined from heat-treated, case-hardened alloy steel, it fits all standard reloading presses utilising an industry-standard 7/8"-14 thread interface. Unlike conventional sizing dies, this body die contains no internal assemblies—omitting the decapping rod, expander button, and neck-sizing mechanism entirely—allowing handloaders to restore easy chambering to tight cases without altering custom neck tension or working the case mouth.

Dedicated Body and Shoulder Resizing: Restores factory chamber dimensions and sets the shoulder back without touching, expanding, or sizing the case neck.
Internal Assembly-Free Design: Manufactured without decapping pins or neck expanders to prevent interference with pre-set neck tension during advanced handloading steps.
Universal Press Compatibility: Features standard 7/8"-14 threads to mount directly into standard single-stage and turret reloading presses.
Precision Steel Construction: Machined from heat-treated alloy steel with an approximate unit weight of 0.16 kg for consistent dimensional stability across repeated reloading cycles.

Specifications

Brand: Redding Reloading Equipment
Model / SKU: 75226
Calibre Compatibility: .257 Weatherby Magnum (.257" bullet diameter)
Thread Interface: 7/8"-14 thread
Required Shellholder: Redding Shellholder #6 or Competition Shellholder #6 (sold separately)
Material: Heat-treated case-hardened alloy steel
Weight: Approximately 0.16 kg (0.35 lbs)
Operation: Manual, case lubricant required

Who is the Redding Body Die for .257 Weatherby Magnum Reloading for?

Precision Handloaders Matching Fire-Formed Brass to .257 Weatherby Magnum Chambers — Relies on exact cartridge geometry to full-length resize the body and push back the shoulder of .257 Weatherby Magnum cases without touching neck dimensions, maintaining consistent bullet-release tension across tailored loads.
Handloaders Utilising Neck-Sizers Who Need to Eliminate Chambering Resistance — Integrates into 7/8"-14 thread presses alongside bushing neck dies, restoring smooth bolt closure by sizing expanded case bodies on .257 Weatherby Magnum brass without duplicating neck-working steps.

Less suitable for: Handloaders seeking an all-in-one, single-stroke operation that decaps, sizes the neck, and sizes the body simultaneously; a standard full-length sizing die or conventional two-die set fits this one-step process better.

SKU	RD102461LP
Model #	75226
Brand	Redding
Shipping Weight	0.2000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

A-zoom Precision 357 Magnum Metal Snap Caps Solid

$53.95

Grovtec Gtsw07 Machine Screw Fore End Swivel Set 1

$26.95

Recommended Products

Redding 80415 Full Length Die Set For 6.5/284 Norm

$138.95

Hornady 416 Remington Magnum Full Length Die Set 5

$254.95

Rcbs Full Length Sizer Die Set Bottleneck Rifle Ca

$140.95

Rcbs Full Length Sizer Die Set Bottleneck Rifle Ca

$242.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 75226 Body Die 257 Weatherby Magnum Reloading 7 8 14

Secure Payment Methods