What shellholder do I need to use with the Redding 303 British Neck Sizing Die?

This neck sizing die requires a Redding Shellholder #8 (Part #11008), which is sold separately. It features an industry-standard 7/8"-14 thread interface, making it compatible with any standard single-stage, turret, or progressive reloading press.

Can I use the brass neck-sized with this die across multiple .303 British rifles?

No. Brass that has been neck-sized using this die is fire-formed to a specific chamber and must only be re-fired in the exact firearm it was originally shot from. Sharing neck-sized brass across multiple rifles can cause chambering failures and safety issues.

How often will I need to switch to a full-length sizing die when using this neck sizer?

While neck sizing extends brass life and minimises work-hardening, cases will gradually expand after 3 to 5 firing cycles until bolt closure resistance increases significantly. At that threshold, you will need to use a full-length sizing die or body die to bump the shoulder back to proper headspace.

Does this reloading die require any electrical compliance or SAA/RCM certification for use in Australia?

No. The Redding 81154 is a purely mechanical, manually operated reloading die requiring no electrical power. Therefore, standard Australian 240V compliance, AU mains plugs, and SAA/RCM regulatory marks do not apply.

303 British Neck Sizing Die - Redding 81154

The Redding .303 British Neck Sizing Die (MPN: 81154) is a precision-machined, heat-treated alloy steel reloading die designed to resize only the case neck of fire-formed .303 British brass while leaving the case body and shoulder dimensions undisturbed. Operating on industry-standard 7/8"-14 threaded presses, this die integrates a decapping rod assembly (#24310), a size button/expander (#40310) for 0.311 in (7.90 mm) diameter bullets, a decapping pin (#01060), and a steel lock ring (#01016). By working only the neck, it reduces work-hardening at the case wall and web, mitigating the case stretching and head separation common to .303 British brass while preserving custom fire-formed chamber fit.

Key Features

Dedicated Neck Resizing: Resizes only the neck of fire-formed bottleneck brass, maintaining the fire-formed body dimensions for concentric chamber alignment.
Extended Brass Life: Minimises cyclic work-hardening along the case wall and web, significantly lowering the incidence of case head separation in .303 British chambers.
Single-Operation Decapping and Expanding: Deprimes spent Boxer primers via the #01060 pin and expands the case neck to correct bullet tension in a single press stroke.
Precision Steel Construction: Machined from heat-treated alloy steel to maintain precise dimensional tolerances across repeated reloading cycles.

Product Specifications

Manufacturer Part Number (MPN): 81154
Calibre Compatibility: .303 British (0.311 in / 7.90 mm bullet diameter)
Thread Interface: Standard 7/8"-14 thread
Required Shellholder: Redding Shellholder #8 (Part #11008; sold separately)
Included Components: Decapping rod assembly (#24310), expander button (#40310), decapping pin (#01060), standard steel lock ring (#01016)
Packaged Shipping Weight: Approximately 0.3 kg to 0.4 kg

Who is the Redding 303 British Neck Sizing Die for?

Classic Target and Service Rifle Shooters — who require consistent shot-to-shot concentricity in Lee-Enfield (No. 1 Mk III*, No. 4 Mk I) or P14 rifles by utilising a neck sizing reloading die that threads into standard 7/8"-14 presses to maintain a custom fire-formed fit for 0.311 in (7.90 mm) calibre brass.
Bolt-Action .303 British Hunters — who want to extend brass case life and reduce case head separation in bolt-action rifles by utilising a dedicated neck sizing die that resizes only the neck for 0.311 in diameter projectiles without overworking the case web.

Less suitable for: Autoloading, pump-action, or lever-action firearms that require full-length resizing to ensure reliable feeding and extraction; cartridges intended to be shared across multiple different rifles; or brass that has reached 3 to 5 firing cycles where chamber expansion creates significant bolt closure resistance, which requires a full-length sizing die or dedicated body die to bump the shoulder back to factory dimensions.

SKU	RD41904LP
Model #	81154
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 81340 7x64 Brenneke Neck Sizing Die 7/8"-1

$175.95

Redding 78136 Type S Neck Die Set For 7mm Remingto

$302.95

Redding 81169r Neck Sizing Die 375 H&H Magnum Relo

$109.95

Redding Type S Elite Bushing Die Set 60443 6mm Cre

$664.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 81154 303 British Neck Sizing Die 7 8-14 Thread Steel

Secure Payment Methods