Will the Redding 81280 neck sizing die work for standard 7mm Remington Magnum brass?

No, this die is built exclusively for the 7mm Remington Short Action Ultra Magnum (SAUM) cartridge and is entirely incompatible with the standard 7mm Remington Magnum or other short-action calibres. It features a 7/8"-14 thread and accepts .284 inch diameter projectiles specifically tailored for 7mm SAUM cases.

What shellholder do I need to use with the Redding 81280 neck sizing die?

You will need a Redding #6 standard shellholder (Part #11006) or a competition shellholder (#11606), which must be purchased separately. The die features standard industry 7/8"-14 threads, making it fully compatible with single-stage, turret, or progressive reloading presses from major brands like Redding, RCBS, and Hornady.

How often will I need to full-length resize my 7mm SAUM brass when using this neck sizing die?

Because neck sizing only works the neck of the case while leaving the fire-formed body intact, the case body will eventually expand to your chamber dimensions after approximately 3 to 5 firing cycles. At that threshold, you will need to use a Full Length Sizing Die (Redding #91280) or a Body Die to bump the shoulder back and prevent difficult bolt closure.

Does this mechanical reloading die require any electrical compliance or SAA/RCM certification for use in Australia?

No, as a 100% mechanical reloading tool, the Redding 81280 requires no electrical input, mains power, or Australian electrical compliance certifications such as SAA or RCM. It is well-suited for outback workshops and reloading benches across Australia, though storing it in a dry, climate-controlled environment is recommended to prevent surface corrosion.

7mm SAUM Neck Die - Redding 81280

The Redding Conventional Neck Sizing Die (MPN: 81280) is engineered specifically for handloaders working with the 7mm Remington Short Action Ultra Magnum (7mm SAUM / 7mm Rem SAUM). Unlike full-length sizing dies, this mechanical reloading die resizes only the case neck to accommodate .284 in (7.21 mm) diameter projectiles while leaving the fire-formed case body and shoulder dimensions undisturbed. Machined from heat-treated alloy steel with an industry-standard 7/8"-14 thread interface, it integrates a decapping rod assembly and an internal expander button to decap spent primers and set proper neck tension in a single press stroke. By eliminating repeated working of the cartridge body, it minimises brass fatigue and maintains optimal chamber-to-case alignment for bolt-action rifles.

Key Features

Dedicated Neck-Only Sizing: Sizes the case neck of 7mm Rem SAUM brass without altering the fire-formed body or shoulder, prolonging brass working life and preserving fire-formed case fit.
Integrated Decapping & Expanding: Outfitted with a complete decapping rod assembly (#23283) and .284 expander size button (#40283) to remove spent primers and establish uniform internal neck clearance during sizing.
Standard Thread Mounting: Precision-machined with a 7/8"-14 thread pattern, ensuring direct compatibility with standard single-stage and turret reloading presses.
Heat-Treated Steel Construction: Precision-ground and hand-polished alloy steel body fitted with a standard 7/8"-14 lock ring (#01016) for repeatable die depth adjustment.

Specifications

Brand: Redding Reloading Equipment
Manufacturer Part Number (MPN): 81280 (Series B)
Calibre Compatibility: 7mm Remington Short Action Ultra Magnum (7mm Rem SAUM / 7mm RSAUM)
Projectile Diameter: .284 in (7.21 mm)
Die Thread Interface: 7/8"-14
Required Shellholder: Redding #6 standard shellholder (#11006) or competition shellholder (#11606) (sold separately)
Internal Components Included: Decapping rod assembly (#23283), decapping rod (#01023), .284 size button (#40283), lock ring (#01016)
Estimated Weight: 250–350 g
Power Source: None (100% mechanical)

Who is the Redding Conventional Neck Sizing Die for 7mm Rem SAUM for?

Precision Handloaders — requires consistent bullet tension on .284 in (7.21 mm) diameter projectiles while eliminating brass overworking on fire-formed 7mm SAUM cases to maximise brass life and concentricity using this 7mm SAUM neck sizing die.
Dedicated Single-Rifle Hunters — relies on fired cases remaining tailored exactly to one specific rifle chamber, utilizing the standard 7/8"-14 thread interface across standard reloading presses to resize only the neck between repeat firings.

Less suitable for: Firearm platforms that require full-length sizing—such as semi-automatic, lever-action, or pump-action rifles, brass swapped across multiple different firearms, or cases fired beyond 3 to 5 firing cycles where body expansion causes heavy bolt closure; these use cases require a dedicated full-length sizing die or a separate body die to bump the shoulder back.

SKU	RD102232LP
Model #	81280
Brand	Redding
Shipping Weight	0.2000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

Don't pay $488.95 $414.95 15.13% OFF

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

A-zoom Precision 357 Magnum Metal Snap Caps Solid

$53.95

Grovtec Gtsw07 Machine Screw Fore End Swivel Set 1

$26.95

Recommended Products

Redding 58280 Competition Neck Die Set 7mm Saum

Don't pay $730.95 $620.95 15.05% OFF

Redding 71923 Type S Neck Sizing Die 7mm Remington

$210.95

Redding 81232 Neck Sizing Die 240 Weatherby Magnum

$175.95

Redding 81923 Neck Sizing Die 7mm Remington Ultra

$141.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 81280 Neck Sizing Die 7mm Rem Saum 7/8-14 Thread

Secure Payment Methods