Will the Redding 83132 form trim die fit my standard reloading press in Australia?

Yes, the Redding 83132 features industry-standard 7/8"-14 reloading press threading and is fully compatible with all standard single-stage and turret presses commonly used in Australia, such as the RCBS Rock Chucker, Redding Big Boss, and Hornady units. As a purely mechanical bench tool requiring no electrical power, it has no complex setup requirements or Australian RCM/SAA certification needs.

Can I use this 6.5x55 Swedish trim die for other 6.5mm calibres like 6.5 Creedmoor?

No, the Redding 83132 is strictly calibrated and machined specifically for the 6.5x55mm Swedish (6.5x55 SE) cartridge dimensions, including its unique case taper and shoulder angles. It cannot be used for other 6.5mm calibres such as 6.5 Creedmoor, 6.5x47 Lapua, or 6.5 PRC.

How do I physically trim the brass cases using this Redding die?

To use the Redding 83132, screw the die into your press until it lightly touches the shellholder, insert a lubed 6.5x55mm case, and raise the ram into the chamber-dimensioned die body. You then use a fine-toothed flat mill bastard file across the hardened, precision-ground top surface of the die to file-trim the protruding case mouth flush to the exact required length.

Is this die suitable for high-volume brass processing sessions?

The Redding 83132 is designed for precision, low-to-medium volume handloading and custom case forming rather than high-volume commercial production. If you need to process hundreds to thousands of cases per session, a motorized lathe trimmer or electric trim die is recommended over this manual file trim method.

Form Trim Die - Redding 83132

The Redding Form & Trim Die – 6.5x55mm Swedish Mauser (MPN: 83132) is a dedicated reloading tool designed for manual case forming and file-trimming operations. Machined to standard chamber dimensions rather than sizing dimensions, this die allows reloaders to trim 6.5x55mm Swedish case mouths to exact lengths without forcing full-length sizing or overworking the brass. Constructed from heat-treated, precision-ground hardened alloy steel, the top surface withstands contact with flat mill bastard files during manual trimming. It features industry-standard 7/8"-14 threading for mounting directly into standard Australian-market single-stage or turret reloading presses.

Key Features:

Chamber-Dimension Profiling: Holds brass cases to chamber dimensions to facilitate accurate neck trimming to SAAMI/CIP lengths without full-length resizing.
Case Forming & Conversion: Serves as an intermediate step to form, reform, or neck down brass into the 6.5x55mm Swedish cartridge profile before final sizing.
Hardened Top Surface: Precision-ground, heat-treated alloy steel top enables flush manual file trimming of protruding case necks.
Universal Press Interface: Utilises standard 7/8"-14 reloading press threading, ensuring compatibility with standard single-stage and turret presses.
Purely Mechanical Operation: Requires no electrical power, operating entirely via manual press action and hand filing.

Specifications:

Manufacturer Part Number (MPN): 83132
Calibre Compatibility: 6.5x55mm Swedish (6.5x55mm Mauser / 6.5x55mm SE; 0.264" bullet diameter)
Thread Interface: 7/8"-14 standard reloading die threads
Material: Heat-treated, precision-ground hardened alloy steel
Shellholder Compatibility: Redding Shellholder #7 (#11007) or Competition Shellholder #11607 (sold separately)
Lock Ring Compatibility: Standard 7/8"-14 lock rings (Redding #01016 or stainless #11071)
Shipping Weight: Approximately 120 g to 210 g (0.26 lb to 0.46 lb)

Who is the Redding 6.5x55 Swedish Form Trim Die for?

Handloaders reloading for the 6.5x55mm Swedish cartridge — requires a dedicated 6.5x55 Swedish form trim die with 7/8"-14 press threading to manually file-trim case necks to exact SAAMI/CIP lengths without repeatedly overworking case bodies through standard sizing dies.
Reloaders converting or forming custom brass for vintage Mauser rifles — relies on the 7/8"-14 threaded hardened steel die body to support intermediate case reforming and necking-down processes into the 6.5x55mm Swedish case profile.

Less suitable for: High-volume processing sessions requiring hundreds to thousands of cases per run, or calibres other than 6.5x55mm Swedish; motorized rotary power case trimmers or calibre-specific electric trim dies are better suited for bulk processing.

SKU	RD102794LP
Model #	83132
Brand	Redding
Shipping Weight	0.1000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

Don't pay $488.95 $414.95 15.13% OFF

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

A-zoom Precision 357 Magnum Metal Snap Caps Solid

$53.95

Grovtec Gtsw07 Machine Screw Fore End Swivel Set 1

$26.95

Recommended Products

Lee Precision 90658 6mm Creedmoor Steel Quick Trim

$33.95

Lee Precision 90163 45 Colt Case Length Gauge With

$19.95

Lyman Perfect Case Trimmer Caliber Specific Pilot

$20.95

Lyman Ezee Hand Case Trimmer Pilot Specific Metall

$22.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 83132 Form Trim Die 6.5x55mm Swedish 7/8-14 Thread

Secure Payment Methods

Calculate Shipping