Will the Redding 35 Remington Form & Trim Die (Model 83165) fit standard reloading presses used in Australia?

Yes, this die features the industry-standard 7/8"-14 threading and is fully compatible with standard single-stage and turret presses commonly found on Australian reloading benches, such as the RCBS Rock Chucker or Redding Boss presses. It also requires a standard Redding #1 shellholder to operate correctly.

How does this form and trim die operate without full-length resizing the brass?

The Redding 83165 is precision-cut specifically to chamber dimensions rather than full-length sizing die dimensions. This allows you to raise the case into the hardened steel die and file-trim excess neck length flush with the top using a standard flat file, all without subjecting the case body to unnecessary cold-working.

Does this unpowered reloading tool require any Australian electrical certifications or adapters?

No electrical compliance or SAA/RCM certifications are required. The Redding 83165 is a completely manual, non-powered mechanical tool that requires no electrical cords, 240V mains power, or Australian plugs for use on your bench.

Is this model suitable for high-volume commercial brass processing?

The Redding 83165 is designed for manual file-trimming and is best suited for low-to-moderate volume case preparation or intermediate case forming from parent brass. If you require high-volume brass throughput, a rotary lathe-style or motorized trimmer should be used instead.

Trim Die - Redding 83165 35 Remington

The Redding 35 Remington Form & Trim Die (MPN: 83165) is a specialised reloading tool engineered to form and manually file-trim .35 Remington brass cases. Cut to internal chamber dimensions rather than standard full-length sizing dimensions, this hardened steel die allows handloaders to trim case necks flush with the die top using a flat file without subjecting the cartridge body to unnecessary sizing or work-hardening. It also serves as an intermediate forming step when necking down parent brass to the .35 Remington profile prior to final sizing.

Chamber-Dimension Cut: Machined to chamber tolerances to allow file-trimming without working or over-sizing the case body.
Hardened Steel Construction: Heat-treated steel surface resists metal file contact during manual neck trimming operations.
Intermediate Case Forming: Facilitates forming parent brass into the .35 Remington cartridge before final sizing passes.
Standard Press Mounting: Uses industry-standard 7/8"-14 threading to integrate directly with standard single-stage and turret reloading presses.
Mechanical Operation: Fully manual, non-powered tool requiring no electrical connections or external power sources.

Specifications

Brand: Redding Reloading Equipment
Model Number (MPN): 83165
Calibre: .35 Remington (.358" bullet diameter)
Thread Standard: 7/8"-14 TPI
Shellholder Compatibility: Redding #1 shellholder (or compatible standard equivalent)
Material: Heat-treated, hardened tool steel
Operation: Manual press-mounted mechanical tool

Who is the Redding 35 Remington Form & Trim Die for?

Handloaders reloading for the .35 Remington cartridge — forms and file-trims .358" bullet diameter case brass to exact chamber lengths on standard 7/8"-14 threaded reloading presses using a #1 shellholder without full-length body sizing.
Reloaders performing intermediate case forming from parent brass — provides the step-down forming profile required when converting parent case stock into .35 Remington cartridge dimensions on standard 7/8"-14 tooling.

Less suitable for: High-volume brass processing workflows; handloaders requiring rapid, high-throughput case length preparation are better served by rotary lathe-style case trimmers or motorized power trimming systems.

SKU	RD41928LP
Model #	83165
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 14050 Titanium Case Trimmer Standard 22 Ca

$76.95

Redding 14045 Case Trimmer Cutter And Shaft With T

$82.95

Lee Precision 90468 Large Cutter And Lock Stud Wit

$22.95

Redding 15260 Steel Case Trimmer Pilot For 6.5mm C

$18.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 83165 35 Remington Form And Trim Die 7/8 In Thread

Secure Payment Methods