What dies are included in the Redding 84132 Deluxe Set for 6.5x55mm Swedish Mauser?

The Redding 84132 Deluxe Die Set is a three-die combination that includes a Full-Length Sizing Die, a Neck Sizing Die, and a standard Bullet Seating Die. It also comes with a storage box that doubles as a loading block, a hex wrench, and a spare decapping pin.

Will these 7/8"-14 threaded dies fit standard reloading presses used in Australia?

Yes, all three dies feature the industry-standard 7/8"-14 thread interface. They are fully compatible with all standard single-stage and turret reloading presses available on the Australian market, including models from Redding, RCBS, Hornady, Lyman, and Lee.

Do I need any additional parts, such as a shellholder, to start reloading with the Redding 84132 set?

Yes, the die set requires a Redding Shellholder #7 (Part #11007), which is sold separately. Ensure you also have proper case lube and a suitable single-stage or turret press ready for setup.

Can I use the neck sizing die in this set for semi-automatic or lever-action 6.5x55mm rifles?

No, the Neck Sizing Die in the 84132 set is strictly recommended for bolt-action rifles where the brass was previously fired in that specific chamber. If you are reloading for semi-automatic actions or need to share brass across multiple rifles, you must use the Full-Length Sizing Die to ensure reliable chambering and cycling.

Are there any electrical compliance requirements or Australian safety certifications needed for this product?

No electrical compliance or SAA/RCM certifications are required because this is a purely mechanical, non-powered reloading tool. It has no electrical components or plugs, making it completely straightforward for outback benchtop use in Australia.

6.5x55 Die Set - Redding 84132

The Redding 84132 6.5x55 Mauser (6.5x55mm Swedish) Deluxe 3-Die Set is a heat-treated alloy steel reloading system designed for standard .264" bullet diameter bottleneck cases. Built with industry-standard 7/8"-14 threaded die bodies, this mechanical reloading tool fits standard single-stage and turret reloading presses. The three-die configuration delivers complete brass processing versatility by pairing a full-length sizing die and a standard bullet seating die with a dedicated neck sizing die, allowing handloaders to tailor case preparation to specific action types and chamber tolerances.

Key Features

Three-Die Configuration: Includes a Full-Length Sizing Die (Part #91132), a Neck Sizing Die (Part #81132), and a Standard Bullet Seating Die (Part #92132).
Extended Brass Life: The neck sizing die sizes only the neck of fire-formed brass, preserving exact chamber fit and reducing case work hardening for bolt-action platforms.
Full-Length Resizing: The full-length sizing die restores fired brass to standard SAAMI/CIP factory exterior dimensions for reliable feeding across semi-automatic actions or multiple rifle chambers.
Precision Machined Construction: Machined from alloy steel on high-precision lathes and hand-polished for smooth brass cycling and consistent operation.
Complete Setup Accessories: Supplied with a decapping rod assembly, standard size button, spare decapping pin, hex wrench, and a dedicated storage box that doubles as a cartridge loading block.

Specifications

Manufacturer Part Number (MPN): 84132
Calibre Compatibility: 6.5x55mm Swedish / 6.5x55 Mauser (.264" bullet diameter)
Thread Interface: Standard 7/8"-14 threads
Required Shellholder: Redding Shellholder #7 (Part #11007, sold separately)
Material: Heat-treated, hand-polished alloy steel
Operating Mechanism: Non-powered mechanical handloading die set
Package Weight: Approximately 0.6–0.7 kg

Who is the Redding 84132 6.5x55 Mauser Deluxe 3-Die Set for?

Bolt-Action Handloaders — Preserves fire-formed dimensions and extends case service life in 6.5x55mm Swedish bolt-action chambers using the dedicated neck sizing die on standard 7/8"-14 threaded presses.
Hunters and Target Shooters — Provides full-length resizing to SAAMI/CIP minimum specifications alongside precise bullet seating for 6.5x55mm bottleneck cases requiring reliable chambering across multiple rifles.

Less suitable for: Fire-formed cases from modified chambers such as the 6.5x55 Ackley Improved, which require dedicated improved-calibre dies, or semi-automatic actions using neck-sized brass, which require dedicated full-length resizing dies to ensure smooth feeding.

SKU	RD102778LP
Model #	84132
Brand	Redding
Shipping Weight	0.2000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

Don't pay $488.95 $414.95 15.13% OFF

A-zoom Precision 357 Magnum Metal Snap Caps Solid

$53.95

A-zoom Perfect 45 Acp Striker Snap Caps Centering

Don't pay $22.95 $15.00 34.64% OFF

Grovtec Gtsw07 Machine Screw Fore End Swivel Set 1

$26.95

Recommended Products

Redding 80180 30 M1 Carbine Three Die Reloading Se

$154.95

Rcbs Ammomaster .50 Bmg Pack Massive Solid Steel R

Don't pay $2,578.95 $2,191.95 15.01% OFF

Lyman Ly-Bsvk Brass Smith Victory Press Reloading

Don't pay $1,335.95 $1,134.95 15.05% OFF

Redding 84109 Deluxe 3 Die Set For 222 Remington R

Don't pay $252.95 $214.95 15.02% OFF

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 84132 6.5x55 Mauser Deluxe 3-Die Set 7/8-14 Thread

Secure Payment Methods