Will the Redding 92242 seating die fit my standard reloading press?

Yes, the Redding 92242 features industry-standard 7/8"-14 TPI threading, making it fully compatible with most standard single-stage and progressive reloading presses used by Australian handloaders, such as presses from Redding, RCBS, Hornady, and Lee.

Can I use this 7mm TCU seating die for other 7mm rifle cartridges like 7mm-08 Remington or 7mm Rem Mag?

No, this die is strictly engineered for the 7mm TCU (Thompson/Center Ugalde) wildcat cartridge utilising .284 inch diameter projectiles. It lacks the internal body dimensions required for standard short-action or magnum 7mm cartridges such as the 7mm-08 or 7mm Rem Mag.

Does the Redding 92242 include a micrometer adjustment for seating depth?

No, the model 92242 is a standard bullet seating die utilizing a Part #01067 seating plug rather than a micrometer head. If you require ultra-fine adjustments in .001" increments, you would need to look at the Redding Competition Seating Die (MPN 55242) or purchase an aftermarket micrometer seating head.

What shellholder do I need to pair with this die for reloading 7mm TCU?

This seating die pairs with a Redding Standard Shellholder #10 (Part #11010) or the Redding Competition Shellholder #11610. Ensure you have the correct shellholder to reliably hold the case base during the bullet seating stroke on your bench.

7mm TCU Seating Die - Redding 92242

The Redding 7mm TCU Bullet Seating Die (Heat Treated Alloy Steel) (MPN: 92242) is a dedicated reloading die designed to seat .284" diameter projectiles into the 7mm TCU (Thompson/Center Ugalde) wildcat cartridge. Machined from alloy steel that is heat-treated in atmospherically controlled furnaces and hand-polished, this standard seating die maintains precise cartridge overall length (COL) while resisting galling and wear. It features industry-standard 7/8"-14 TPI threading to interface with single-stage and progressive reloading presses, and includes an internal roll crimp profile that can be applied or backed off depending on press setup.

Key Features

Precise Projectile Seating: Incorporates an internal bullet guide and seating plug to align and seat standard .284" diameter bullets to consistent cartridge overall lengths.
Adjustable Roll Crimp: Built-in roll crimp feature allows reloaders to apply a crimp by adjusting die depth against the shellholder or back off the die to seat bullets without crimping.
Heat-Treated Alloy Steel: Precision-machined and furnace-hardened steel construction prevents galling and withstands extended reloading lifecycles.
Standard Thread Interface: Features 7/8"-14 TPI threads compatible with standard mechanical reloading presses.

Specifications

Manufacturer Part Number (MPN): 92242
Calibre Compatibility: 7mm TCU (Thompson/Center Ugalde)
Bullet Diameter: .284" (7mm)
Die Threading: 7/8"-14 TPI
Seating Plug: Part #01067
Lock Ring: Part #01016 (standard steel)
Shellholder Compatibility: Redding #10 Standard Shellholder (Part #11010) or Competition Shellholder #11610 (sold separately)
Power Requirements: None (manual mechanical tool)

Who is the Redding 7mm TCU Bullet Seating Die for?

Australian Thompson/Center Contender Handloaders — requires a 7/8"-14 TPI threaded 7mm TCU bullet seating die to seat .284" diameter bullets accurately into fire-formed 7mm TCU brass for single-shot pistol platforms.
Metallic Silhouette Handgunners and Specialty Rifle Shooters — needs consistent cartridge overall length using a dedicated 7mm TCU seating die with a built-in roll crimp to manage .284" projectile alignment for competition handloads.

Less suitable for: Handloaders seeking micrometer adjustments calibrated in .001" increments or straight-line floating sleeve alignment, who require a dedicated competition micrometer seating die, or those loading standard factory 7mm rounds like 7mm-08 Rem or 7mm Rem Mag, which require full-length dies machined specifically for those cartridge dimensions.

SKU	RD102258LP
Model #	92242
Brand	Redding
Shipping Weight	0.2000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

A-zoom Perfect 45 Acp Striker Snap Caps Centering

Don't pay $22.95 $15.00 34.64% OFF

Grovtec Gtsw07 Machine Screw Fore End Swivel Set 1

$26.95

Recommended Products

Redding 80415 Full Length Die Set For 6.5/284 Norm

$138.95

Redding 55022 Standard Seating Stem 22 Caliber Com

$62.95

Redding 55748 Vld Seating Stem 7mm Long Competitio

$62.95

Redding 84135 270 Winchester Deluxe 3 Die Set For

$214.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 92242 7mm Tcu Bullet Seating Die Alloy Steel

Secure Payment Methods