Are these Sellier & Bellot 6.5x55 SE brass cases compatible with standard reloading tools?

Yes, these cases feature a standard Large Rifle Boxer primer pocket, ensuring full compatibility with universal depriming and repriming tools found on standard reloading benches. They are built to C.I.P. specifications for the 6.5x55 SE cartridge with a nominal 55 mm case length.

What preparation steps are recommended before loading these new S&B unprimed cases for the first time?

Sellier & Bellot recommends that new, unprimed brass cases should always be full-length resized, chamfered, and deburred before your initial powder charge and bullet seating. You may notice some factory annealing discoloration on the neck and shoulder area, which is normal and disappears after tumbling or cleaning.

Do these S&B 6.5x55 SE cases work in modern sporting rifles as well as historical service rifles?

Yes, these cases are designed for custom metallic cartridge handloading across classic Swedish Mauser service rifles (such as m/96 and m/38 models) and modern bolt-action sporting rifles chambered specifically in 6.5x55 SE. However, they are strictly non-interchangeable with other 6.5mm calibres like 6.5 Creedmoor, 6.5x57, or 6.5 PRC.

Do I need a special permit or dangerous goods declaration to purchase unprimed brass cases in Australia?

In Australia, unprimed cartridge brass cases are classified as inert reloading components and generally do not require a dangerous goods transport declaration. However, state and territory firearms legislation dictates that purchasers must hold the appropriate firearm licence or collector permit where applicable for cartridge case acquisition.

6.5x55 SE Brass - S&B V337212

The Sellier & Bellot 6.5x55 SE Unprimed Brass Cases (20 Pack) provide factory-annealed, reloadable metallic cartridge hulls for handloaders developing custom ammunition. Manufactured in the Czech Republic to standard C.I.P. specifications, these cases feature a 55 mm nominal case length designed to seat standard 6.71 mm (.264 in) diameter projectiles. Each case incorporates a standard Large Rifle Boxer primer pocket, ensuring compatibility with standard depriming and repriming reloading tools. Built for both vintage military platforms and modern sporting rifles, they offer a durable brass foundation for hunting and target shooting.

Key Features

Factory Neck Annealing: Undergoes thermal annealing at the neck and shoulder to improve ductility, minimise work-hardening, and extend service life across repeated resizing cycles.
Large Rifle Boxer Primer Interface: Standard Boxer pocket design enables straightforward spent primer removal and uniform seating using standard handloading presses and priming tools.
C.I.P. Dimensional Compliance: Produced to standard 6.5x55 SE chamber dimensions with a 55 mm nominal case length for reliable feeding and chambering.
Inert Reloading Component: Unprimed, empty cases allow the handloader full control over primer selection, powder charges, and overall cartridge length.

Product Specifications

Brand: Sellier & Bellot
Manufacturer Part Number: V337212
Country of Origin: Czech Republic
Cartridge Type: 6.5x55 SE (6.5x55mm Swedish / Swedish Mauser)
Component Type: Unprimed brass cartridge cases
Package Quantity: 20 pieces per bag
Package Weight: Approximately 280 g
Nominal Case Length: 55 mm
Compatible Bullet Diameter: 6.71 mm (.264 in)
Primer Pocket Type: Large Rifle Boxer

Who is the Sellier & Bellot 6.5x55 SE Unprimed Brass Cases 20 Pack for?

Service rifle target competitors — Seeking reliable brass cases for vintage m/96 or m/38 Swedish Mauser rifles, utilising standard 55 mm nominal case length dimensions and Large Rifle Boxer primer pockets to build consistent loads for historic military matches.
Medium-to-large game hunters — Requiring an economical 20-pack brass case foundation to develop tailored 6.5x55 SE hunting cartridges pushing 120–160 gr projectiles for deer, pigs, or goats.

Less suitable for: Handloaders seeking benchrest competition precision requiring tighter weight-sorting tolerances and uniform factory neck wall concentricity out of the box (who are better served by high-tier match-grade unprimed brass), as well as firearms chambered in alternative 6.5mm calibres such as 6.5 Creedmoor, 6.5x57, or 6.5 PRC.

SKU	SAB42178LP
Model #	V337212
Brand	S&B
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

S&B V337042 6.5 Grendel Brass Cases Unprimed 20 Pa

$27.95

S&B V337632 Brass Cases 8x57 Jrs Unprimed 20 Pack

$32.95

Sellier & Bellot V337002 Brass Cases 22 Hornet 20

$20.95

Sellier & Bellot V337062 Brass Cases 223 Rem 20 Pa

$23.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Sellier & Bellot V337212 Brass Cases 6.5x55 Se 20 Pack

Secure Payment Methods