Accessories guide
Telos Mounts and Accessories: Tripod, Window and Vehicle Use
There are three practical ways to use a Telos: in the hand while walking, on a tripod while watching a spot, or resting on a car window while scanning a paddock. Handheld suits stalkers and anyone walking boundaries. A tripod suits long sits, recording and anyone using higher magnification. A window mount suits farmers who check paddocks from the ute. Pulsar makes an accessory for each, though which one fits depends on your model.
If you haven't chosen a Telos yet, start with our Pulsar Telos buyer's guide.
What fits which Telos
The chart below lists Pulsar's options and which models they're listed for.
The detail that trips people up is the rangefinder. Pulsar lists its two Telos tripod adapters for the LRF models, which have a different body shape. Every Telos lists an adaptor for a 1/4-inch thread in its specifications, and Pulsar says the flagship LRF XT50 has a built-in tripod mounting point. If you own a non-LRF Telos, check the exact fit with us before buying an adapter.
On a tripod
A tripod changes how much you can see. Handheld, small movements blur the image as you zoom in; on a tripod, you can sit at higher magnification and study an animal properly, or record steady footage to watch later.
Pulsar offers two adapters. The Telos LRF tripod adapter fits most tripods and its plate lets you level the monocular horizontally and vertically. The Telos LRF B-Lock adapter uses an Arca-Swiss compatible quick release with a built-in strap, which suits shooters who already run an Arca-style tripod or bipod head. The XT50's own mounting point and electronic image stabilisation, covered in our Telos LRF XT50 review, make it the most tripod-friendly model.
From the vehicle
Say you're doing a slow lap of the farm track at night, stopping at each gate to check the paddocks for foxes among the lambs. Holding the Telos out the window works, but your arm tires and the image wobbles. Pulsar's Flat Glass Mount fixes a 1/4-inch thread device to car glass and other clean, flat surfaces, and Pulsar lists Telos as compatible.
From a vehicle, field of view matters even more, because you're scanning from one spot. The diagram below shows how much paddock each Telos takes in at 200 m.
Turn the engine off before you scan. A running motor shakes the mount, and its exhaust and heat can shimmer across the view. Also check your state's rules on using optics and firearms from vehicles; they differ, and they matter more than the gear.
Pulsar's Window Frame Mount and Tree Mount are listed for its Axion monoculars rather than the Telos, so don't assume they fit.
In the hand
For walking and stalking, the Telos's own design does most of the work. The rubber-coated body grips in wet weather, and Pulsar's Telos case is built to carry on a waist belt or attach to Molle gear on a pack, so the monocular is at hand without swinging around your neck.
What we'd set up
The chart below is how we'd choose.
Most buyers need nothing extra to start: the case and strap cover walking, and a lot of observation happens from a rest. Add a tripod adapter if you record footage or watch from a hide, and the Flat Glass Mount if most of your scanning happens from the ute. For which model to put on it, our guides to the XP50 and XG50, the XQ35 and identification range will help.
Shop the Pulsar Telos range
Check current prices and stock, or contact us about mounts and adapters.
View all Telos modelsTelos Mounts and Accessories FAQ
Can you mount a Pulsar Telos on a tripod?
Yes. Pulsar offers a Telos LRF tripod adapter and a Telos LRF B-Lock tripod adapter, both listed for the Telos LRF models, and every Telos lists an adaptor for a 1/4-inch thread. Pulsar says the Telos LRF XT50 has a built-in tripod mounting point. Check the right fit for your exact model before buying an adapter.
What does the Telos LRF tripod adapter do?
The Telos LRF tripod adapter, Pulsar model 79012, attaches a Telos LRF monocular to most tripods. Its mounting plate lets you level the device horizontally and vertically, which helps for long observation and steady recording. Pulsar lists it as compatible with all Telos LRF models and sells it separately.
What is the Telos LRF B-Lock adapter?
The Telos LRF B-Lock tripod adapter, Pulsar model 79015, mounts a Telos LRF to a tripod with an Arca-Swiss compatible quick-release fitting. A built-in strap holds the monocular securely. It suits shooters who already use an Arca-style tripod or bipod head and want to swap devices quickly.
Can I use a Pulsar Telos from a vehicle?
Yes. Pulsar's Flat Glass Mount fixes devices with a 1/4-inch thread to car glass and other clean, flat surfaces, and Pulsar lists Telos as compatible. Scan with the engine off to avoid vibration and heat shimmer. Check your state's rules on using optics and firearms from vehicles before you go.
Does the Pulsar Telos come with a carrying case?
Pulsar describes a Telos carrying case designed to sit on a waist belt or attach to Molle webbing on packs and vests, and lists a carrying case and neck strap in the Telos LRF XT50's box. Contents can vary by market, so check the product page or ask us to confirm what's included in the Australian kit.
Can a Pulsar Telos be mounted on a rifle?
The Telos is designed as a handheld observation monocular, and Pulsar doesn't list a rifle mount for it. For a thermal you shoot through, look at a dedicated thermal riflescope instead. Many hunters carry a Telos to scan and identify, then use a separate scope on the rifle to take the shot.
Will a Pulsar Tree Mount or Window Frame Mount fit a Telos?
Pulsar lists its Tree Mount and Window Frame Mount for its Axion monoculars, not for the Telos, so don't assume they'll fit. For vehicle use, the Flat Glass Mount is the Pulsar mount listed as Telos-compatible. For static observation, use a tripod with the appropriate Telos adapter or the XT50's mounting point.
What tripod should I use with a Telos?
Any stable tripod with a 1/4-inch screw or an Arca-Swiss head will work with the right adapter. A compact tripod with a smooth panning head suits scanning, since you'll sweep slowly from side to side. At around 0.57 to 0.73 kg, the Telos doesn't need a heavy tripod, but a sturdy one helps at high magnification.
Does Xhunter sell Pulsar Telos mounts and adapters?
We stock the Pulsar Telos monoculars, and mounting accessories can vary in availability. Contact us with your Telos model and how you plan to use it, and we'll check what's available for it. Matching the adapter to whether your Telos has a rangefinder is the most important detail.
Accessory details and compatibility come from Pulsar's published accessory listings; field-of-view widths are our own calculation.